Underwater housing Ikelite Canon R100

An underwater housing for Canon EOS R100 camera from Ikelite

What's in the box:

1. UW-housing Ikelite R100
2. Rear o-ring #IK0110 (installed)
3. Front o-ring #IK0132.36 (installed)
4. Waterproof bulkhead cap #IK9104.7 (installed)
5. Silicone lubricant 1cc tube

Housing housing ergonomics

This is a straightforward and intuitive housing design. Curved trigger levers for shutter and back button focus can hug the side of the housing if shooting without a grip or be extended for easy reach from an optional handle. AF-ON is accessible with your thumb by a lever control at the side of the housing. When combined with back button focus, this provides a shooting method far easier than attempting to half-press the camera's shutter button.
Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The Tray with Dual Quick Release Handles #IK9523.64 is the most popular choice for both handling and attachment of accessories. We recommend installing the Trigger Extension #IK4077.95 to the shutter and AF-ON controls when using a right-hand handle.

Viewfinder and vacuum

The housing's standard viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder #IK6890.2 or 45° Magnified Viewfinder (Type 3) #IK6891.3. A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit #IK47012. A hand pump with gauge allows you to draw a vacuum on the housing to simulate water pressure and check for leaks prior to entering the water.

Strobe

This housings supports your choice of shooting manual strobes or adding TTL electronics depending on your application. The included manual hotshoe with Ikelite ICS-5 bulkhead supports manual strobe exposure with a wide variety of strobes including Ikelite, SEA&SEA, INON, and others. Enjoy the fastest and most accurate strobe exposure on the market by adding the DL5 DS Link Canon TTL Converter and CT1 TTL Hotshoe Kit #IK46075 and a compatible Ikelite DS strobe. The DS Link can be programmed to the camera's specific TTL protocol and supports both first curtain and rear curtain sync up to the camera's maximum flash sync speed

Housing specifications

• 200 ft (60m) depth rating
• Extendable levers for shutter release and back button focus
• Interchangeable Dry Lock Micro port system including flat ports, 6"dome ports, and 8" dome ports
• Lightweight and corrosion-proof ABS-PC construction
• Clear view back with laser engraved control markings
• Ergonomic, field serviceable direct-drive controls
• Accessory port for optional vacuum system
• Made in the USA